规范序号 |
规范中文名字 |
规范英语名 |
GB/T4213-1992 |
自力式调节阀 |
Pneumatic industrial process control valves |
GB10869-1989 |
发电厂调节阀门技术性标准 |
Specification of control valves for fossil power stations |
JB/T7228-1994 |
电动调节阀 |
|
JB/T57182-1994 |
自力式调节阀产品品质分等 |
|
JB/T57218-1994(2005复核) |
自力式调节阀稳定性规定与考评方式 |
|
HG/T3237-1989 |
橡塑机械用自力式压力控制阀 |
|
NF C46-503-1999 |
工业生产全过程调节阀门.第2-1一部分:总流量.在组装标准下液体流量的横截面方程式 |
(Industrial-process control valves. Part 2-1 : flow capacity. Sizing equations for fluid flow under installed conditions.) |
NF C46-502-1993 |
工业生产全过程用调节阀门.第1一部分:专业术语和总论 |
(Industrial-process control valves. Part 1 : control valve terminology and general considerations.) |
NF C46-506-1990 |
工业生产全过程用调节阀门.总流量.流量的特点和矫正的原有指数 |
(Industrial-process control valves. Flow capacity. Inherent flow characteristics and rangeability.) |
NF C46-525-1991 |
工业生产全过程用调节阀门,调节阀的限制栅屏 |
(Industrial-process control valves. Control valve data sheet.) |
NF M62-301-4-2001 |
密封性罩用部件.第4一部分:自然通风和汽体清理系统软件(如:过滤装置和蒸汽疏水阀)的安全可靠和调节阀及其调节和保护设备 |
(Components for containment enclosures - Part 4 : ventilation and gas-cleaning systems such as filters, traps, safety and regulation valves, control and protection devices.) |
ANSI/UL 144-2001 |
压缩天然气压力控制阀的检测标准 |
(Standard for Safety for Pressure-Regulating Valves for LP Gas) |
EN ISO 5135-1998 |
声学材料 在混响室中测量中央空调智能终端、中央空调终端设备模块、减振器和调节阀的噪音输出功率级 |
Acoustics - Determination of sound power levels of noise from air-terminal devices, air-terminal units, dampers and valves by measurement in a reverberation room (ISO 5135:1997) |
EN 88/prA2-2001 |
通道工作压力200毫巴下列的天然气器材的压力控制阀 改动A2 |
Pressure governors for gas appliances for inlet pressures up to 200 mbar; Amendment prA2 |
prEN 14129-2001 |
汽化原油汽(LGP)罐压力控制阀 |
Pressure relief valves for LPG tanks |
EN 88-1991 A1-1996 |
通道工作压力200毫巴下列的天然气器材的压力控制阀 |
Pressure governors for gas appliances for inlet pressures up to 200 mbar |
DIN V 19259-2-1999 |
机器设备参考文献.调节阀门用带归类平面图的基本数据类型 |
(Documentation of devices - Standard data element types with associated classification for valves) |
DIN EN 60534-6-1-1998 |
工业生产步骤调压阀.第6一部分:调节阀推动的部位控制器固定不动用组装关键点.第1节:行程安排推动上部位控制器的组装 |
(Industrial-process control valves - Part 6: Mounting details for attachment of positioners to control valves - Section 1: Postioner mounting on linear actuators (IEC 60534-6-1:1997); German version EN 60534-6-1:1997) |
DIN 3163-1974 |
磅级25的冷却液循环系统直达调节阀门 |
(Control through valves for refrigerant circuits, nominal pressure 25 bar) |
DIN 32730-1993 |
供暖设备原水和蒸汽用具备安全性作用的调节阀门.安全生产技术标准和检测 |
(Valves with a safety function for water and steam in heating systems; safety requirements and testing) |
DIN 58600-2003 |
吸气保护装置.法国消防大队用调节耗氧量O2调节阀门与单独引路空气压缩呼吸器面具中间的插塞联接 |
(Respiratory protective devices - Plug-in connection between lung governed demand valve and facepiece for self-contained open-circuit compressed air breathing apparatus for use by German fire brigade) |
UL 144-1999 |
压缩天然气调节阀门 |
(LP-gas regulators ) |
UL 17-1994 |
汽柴油机器设备用通风孔或烟筒射频连接器调节阀 |
(Vent or chimney connector dampers for oil-fired appliances ) |
JIS B8387-2000 |
液压.四孔调节阀和四孔方位操纵闸阀.02,03,05规格.夹紧规格 |
(Hydraulic fluid power -- Four-port modular stack valves and four-port directional control valves, sizes 02, 03 and 05 -- Clamping dimensions) |
IEEE 1189-1996 |
大型设备用调节阀门铅酸电池(VRLA)电瓶的挑选手册 |
(Guide for selection of valve-regulated lead-acid (VRLA) batteries for stationary applications) |